1. <li id="93kbi"><object id="93kbi"></object></li>

    <button id="93kbi"><object id="93kbi"></object></button>

    無錫市揚名電熱電器廠

    0510-85416868

    鋁膠帶 壓敏膠帶 喉卡 警示標牌等
    Product
    聯系我們Contact us
    咨詢熱線
    0510-85416868

    手機:18912366584

    電話:0510-85416868

    傳真:0510-85401718

    地址:無錫市梁溪區揚名高新技術產業園匯太路58號

    • 鋁膠帶 壓敏膠帶 喉卡 警示標牌等

    鋁膠帶Aluminum Adhesive Tape

    鋁膠帶系薄鋁質帶涂復特殊的膠粘劑后所形成的一種膠粘帶。
    電伴熱系統中主要用于固定電伴熱帶,固定溫控器的毛細管和感溫包,或者用于撓性電熱板的輔助固定。其作用除能方便電伴熱產品安裝固定外,主要是能增大散熱面,有利于熱傳導。規格:50m×50mm×0.05mm 
    Aluminum is mainly used for fixing the heating cable, temperature controller, sensor or flexible heating panel. In addition to fixing the instrument, it is mainly used for fixing electric heating cable and temperature sensor, expanding heat conducting area and enhancing heat transmitting effect. Specification: 50m×50mm×0.05mm  
     
       
    鋁膠帶aluminum adhesive tape   圖38
    正確使用鋁膠帶是體現電伴熱產品優越性的重要一環。Correctly use the aluminum adhesive tape is an important part in heat tracing installation.
     
    注:考慮到安裝損耗,鋁膠帶的長度一般為所購電伴熱帶長度的1.2倍,以滿足安裝需要。Notice: Considering the spare consumption, we recommend that the length of the aluminum tape should be 1.2 times of the heating cable.
     

    耐熱壓敏膠帶Heat-resistance Pressure-sensitive Adhesive Tape

    耐熱壓敏膠粘帶又稱固定膠帶,是在玻璃纖維帶基礎上涂復特殊粘劑后形成的一種膠粘帶。
    電伴熱系統中,電伴熱帶安裝后,用該耐熱壓敏帶每0.8米沿管道徑向將電伴熱帶固定牢,其配備長度視伴熱管線和長度而定。
    規格:20m×20mm×0.1mm
    This adhesive tape is a kind of glass fiber with special adhesive. After the electric heating cable is installed with aluminum adhesive tape, the tape is used radially along the pipe to fix cable tightly in every 0.8m interval. Specification: 20m×20mm×0.1mm
     
     
    耐熱壓敏膠帶Heat-resistance pressure-sensitive adhesive tape   圖39
    ? 耐候性和耐熱性(-40~200℃)優越
    superior weather-resistance and heat-resistance
    ? 耐油性、耐溶劑、耐水性優越
    excellent oil, solvent and water resistance
    ? 性能穩定、不易變色、與基材密著性好
    stable performance, no discoloration, closely attach to the surface
    ? 聚合物凝聚力高,適合耐久性要求高的產品
    polymer has strong cohesive force, suitable for the products need long performance

    喉卡Pipe Clamp

    喉卡是固定電熱帶附件用的一種不銹鋼帶,使用長度可按實際需要剪切。
    Pipe clamp is made of stainless steel belt to fix accessories of heating cable and cut to length.
    喉卡規格: 寬:12.5mm, 厚:0.5mm
    Specification: width thickness
     
                    
    鋼帶stainless steel belt   圖40                  螺絲screw   圖41
    ? 取鋼帶一段,長度略比管徑加電源接線盒底座(或溫控器底座)長一點
    the length should be longer than the length of tube diameter and the base of power connection kit (temperature controller)
    ? 將鋼帶扣在管道和底座上
    clasp the base with the pipe
    ? 用起子旋螺絲,直到把卡箍收緊,將電源接線盒緊箍在管道上
         tighten the clamp
     
     
     
     
     
     
     
     
     
     
     

    警示牌Warning Label

    用于貼在電伴熱管道或罐上,指明電伴熱電纜或者電源點所在位置,防止因誤施工而造成不必要的損害。Warning label is put at visible places of heating pipe or tank, to clearly show the location of the cable or power supply and avoid unnecessary damage during the mounting.
     
     
           警示標牌Warning label   圖42
    上一個:尾端盒
    下一個:電源接線盒
    真人作爱试看90分钟_国产高清不卡无码视频_强制连续潮喷高清无码_免费香蕉成视频在线观看

    1. <li id="93kbi"><object id="93kbi"></object></li>

      <button id="93kbi"><object id="93kbi"></object></button>